Updating the Firmware on Your InnoTab® 2S
Introduction

Firmware updates will periodically be available to improve the performance of your InnoTab® 2S. These firmware updates can only be completed on InnoTab® 2S by connecting the tablet to your computer with the USB cable and launching Learning Lodge™. This tutorial will take you through the process step by step.

Step 1

If you have just finished registering your InnoTab® 2S on Learning Lodge™, keep your tablet connected to the computer and you will be redirected to the InnoTab® 2S home page.

OR if you have already registered your InnoTab® 2S, just launch Learning Lodge™ by connecting your tablet to your computer with the USB cable and turning on your tablet. Learning Lodge™ will automatically launch when you turn the tablet on.

Step 2

If a newer version of InnoTab® 2S firmware is detected, the update procedure will begin.

If you don't see the firmware update prompts, you maybe already have the latest version. You can click on the "Update my InnoTab® 2S" button to check manually.

Step 3

IMPORTANT: Your InnoTab® 2S needs a steady power supply during the firmware update. Please insert a fresh set of 4 AA batteries or use an AC adaptor during the firmware update. Also, keep your InnoTab® 2S powered on until the update process is complete.

If your computer is running Windows Vista, Windows 7 or Windows 8, you will be prompted to to allow the update. Please click Yes to continue.

Step 4

After the firmware update is downloaded to your InnoTab® 2S, you will be instructed to turn the tablet off and disconnect it from your computer.

You may click OK to exit Learning Lodge™ at this time.

Step 5

After your InnoTab® 2S is disconnected from your computer, turn it back on.

The InnoTab® 2S firmware update will begin. You may see a black screen on your InnoTab® 2S for a short period of time (20-30 seconds). This is normal so please wait for the update to complete. Please do not turn off your InnoTab® 2S until the firmware update is complete.

Step 6

When the InnoTab® 2S firmware update is complete, your tablet will go to the Choose Your Name menu screen.

Your InnoTab® 2S is fully updated and ready to play!